전체상품목록 바로가기

본문 바로가기


공급사 바로가기

DSA700 Series

(해외배송 가능상품)
기본 정보
상품명 DSA700 Series
상품간략설명

DSA700 Datasheet

DSA700 Programming Guide

DSA700 Specifications

DSA700 User's Guide

(SSC-DSA) 및 S1220 응용
판매가 문의
상품요약정보 RF Spectrum Analyzer
제조사 RIGOL
수량 수량증가수량감소
옵션바로선택

개인결제창을 통한 결제 시 네이버 마일리지 적립 및 사용이 가능합니다.

상품 옵션
옵션 선택

(최소주문수량 1개 이상 / 최대주문수량 0개 이하)

사이즈 가이드
상품 목록
상품명 상품수 가격
DSA700 Series 수량증가 수량감소 문의 (  )
총 상품금액(수량) : 0 (0개)

이벤트

DSA705(100kHz~500MHz),DSA710(100kHz~1GHz)



특    징


 주파수 대역 :

 DSA710 : 100kHz to 1GHz
 DSA705 : 100kHz to 500MHz
 DANL : -130dBm (typ)
 Phase noise : Min -80dBc@10kHz offset
 Level 불확도 : 1.5dB 이하
 최소 분해능 대역(Min RBW) : 100Hz
 SSC mode에서 2FSK변조신호 측정 및 분석
 Amplitude 측정 : DANL to +20dBm
 Pre-Amp 내장
 USB/LAN interface, GPIB(Option : USB to GPIB Adaptor)
 8 inch TFT LCD display
 EMI-Pre Compliance test (opt)
 EMI filter & QP detector (opt)




화    면


100 Hz 최소 분해능 대역


AM 복조

이상 신호의 손쉬운 포착 확인


피크테이블(표) 기능


-130dBm 전치증폭기 기본 내장(DANL)


-80 dBc/Hz Phase Noise @10 kHz offset


Powerful PC software Option


EMI Pre-Compliance Test Software




사    양


 

DSA705

Frequency Range

9 kHz to 500 MHz

DANL *1

-110 dBm, typical

Phase Noise

-80dBc/Hz @10kHz offset, typical

Minimum RBW

100Hz
Interfaces
USB host & device, LAN, GPIB (optional), 10 MHz REF In, 10 MHz REF Out, External Trigger In
DimensionsWidth X Height X Depth = 14.2 in. X 7.0 in. X 5.0 in.
(361.6 mm X 178.8 mm X 128 mm) ;
Weight9.4 lbs. (4.25 kg)

*1: 100Hz RBW, trace average >= 50, sample detector, typical

 

DSA710

Frequency Range

9 kHz to 1.0 GHz

DANL *1

-110 dBm, typical

Phase Noise

-80dBc/Hz @10kHz offset, typical

Minimum RBW

100Hz
Interfaces
USB host & device, LAN, GPIB (optional), 10 MHz REF In, 10 MHz REF Out, External Trigger In
DimensionsWidth X Height X Depth = 14.2 in. X 7.0 in. X 5.0 in.
(361.6 mm X 178.8 mm X 128 mm) ;
Weight9.4 lbs. (4.25 kg)

*1: 100Hz RBW, trace average >= 50, sample detector, typical








표준부속품


 Quick guide (hard copy)
 Power cable




Options


 EMI-DSA800 : EMI Filter & Quasi peak detector

 AMK_DSA800 : Advanced measurement kit

 Ultra-spectrum : PC based software
▶ SSC-DSA : Signal seamless capture
▶ DSA Utility Kit, RF Adaptor Kit, RF CATV Kit, RF Attenuator Kit, ATT03301H, CB-NM-NM-75-L-12G, CB-NM-SMAM-75-L-12G
▶ TX1000 : RF demo kit (transmitter)
▶ RX1000 : RF demo kit (receiver)
▶ NFP-3 : Near field probe
▶ S1210 EMI Pre-comliance Software : EMI Pre-compliance test software

▶ RM-DSA800 : Rack mount kit
▶ BAG-G1 : Soft carrying bag
▶ CB-USBA-USBB-FF-150 : USB cable
▶ USB-GPIB : USB to GPIB interface converter for instrument




동영상






F A Q


Where do I find instrument drivers for LabVIEW?

When I plug in my instrument via USB, I get a Windows Page Fault error (Blue Screen of Death / BSoD).
There is a known issue with the IVI VISA Shared components version. See attached document for more details.

DSA Ethernet connectivity troubleshooting
Here are some hints and tips to successfully connecting and testing the Ethernet connection on the Rigol DSA line of instruments.

Software Compatibility
The attached PDF file describes Windows 7 Compatibility Issues.

DSA Packing list
Here is a sample of the packing list for the DSA family of spectrum analyzer's.

DSA Calibration Certificate
Here is a sample of the calibration certificate for the DSA family of spectrum analyzers.

VISA Runtime for Apple OS X
To use a VISA compatible Rigol instrument under Apple OS X, the user must install National Instruments VISA run-time engine for OS X As of this writing the latest OS X VISA run-time engine from National Instruments is NI-VISA 5.0 NI-VISA 5.0 can be downloaded directly

Working with DSA Correction factors 
Here are instructions on working with DSA correction factors.

Spectrum analyzer detector selection guide. 
Spectrum analyzers have many options when it comes to input detector configurations. This document provides a guide to selecting the proper filter for the input signal type.

DSA External Trigger Rate 
The DSA 1000, 1000A, and 800 series of spectrum analyzers have an external trigger rate of approximately 5Hz.

Help File Error: Navigation to web page cancelled. 
Some instrument manuals are compiled HTML files with extensions ending in .CHM. On occasion, they have shown "Navigation to web page cancelled". Here are some steps to help solve that error.

Using A Tracking Generator 
Ken Wyatt explains a tracking generator on his EMC blog. Leave Rigol to read it on the blog site.

VB1020/1030 VSWR Bridge User's Guide and Data Sheet. 
Here is the spec sheet for the VSWR data sheet.

DSA FM/AM Demodulation tips 
Here are some helpful tips for using the demodulation function on the Rigol DSA's.

DSA Firmware Upgrade instructions 
See attached for instructions to upgrade your DSA.

How to find installed DSA options 
Here are instructions for checking the installed options for the Rigol DSA series of spectrum analyzers.

UltraSpectrum License Activation instructions
UltraSpectrum is a software package that gives remote controlled data collection and analysis for Rigol DSA spectrum analyzers. See attached for instructions on activating the software.

Bits vs. dBs 
Here are instructions on converting bits of resolution to dBs.

My Instrument IVI Driver does not appear in the LabVIEW tools palette. 
You may need to manually find and convert the IVI driver. See attachment for more details.

The instrument not recognized over the USB bus
In some cases, an instrument may not be recognized over the USB bus. Here are some troubleshooting hints to help.

Are your products UL or CSA listed? 
At this time, many of our products are C TUV USA listed. Per the TUV website, http://www.certipedia.com/companies/37679/certificates?locale=en The C TUV US mark is recognized as the equivalent and direct replacement to the UL and CSA marks by city, county and state/provincial

Rigol Scopes VISA Driver Installation / Rigol's UltraScope software not detect Rigol scope attached to PC via USB OR User receives "Run Time Error '48': File not found VISA32.DLL" error message when UltraScope is launched. 
The user either has not installed the latest available National Instruments VISA Runtime engine or the version of National Instrument’s VISA Runtime Engine included on the CD that the user installed is outdated. In both cases, the recommended solution is to visit National

Common HAM and Broadcast uses for a spectrum analyzer. 
A Spectrum Analyzer can be a valuable tool for any amateur radio (HAM) or broadcast Engineer. See a few of the most popular uses in this document.

How can sweep time effect my Spectrum Measurements? 
Sweep time and detector types can drastically effect your spectrum measurements, especially with modulated signals. See the attached note for more details.

Does the instrument clock accuracy match the external clock accuracy?

VB.NET basic instrument communication example 
Here is a short example on using National Instrument VISA and VB.NET to communicate with an instrument.

Useful Getting Started EMC links

What is the fastest sweep time in Zero Span mode with a Spectrum Analyzer?
That is instrument dependent, but we show how to perform a quick test using a function generator in Burst mode.

Douglas Smith's EMC links 
Here are some helpful links to online articles presented by Douglas Smith.

NRSC AM Measurements using a DSA 
Here are instructions on setting up a Rigol DSA to make NRSC measurements.

How can I optimize the Peak scan measurements on a DSA spectrum analyzer?
Try lowering the RBW setting. This will increase the resolution of each scan and provide a more defined peak that will be easier to identify. See attached.

How do I measure FM Deviation with a DSA? 
Here are instructions on using the Max Hold function to measure FM Deviation with a Rigol DSA spectrum analyzer.

How do I save a trace as a CSV file with the DSA800 series? 
The DSA800 series can save CSV files to an external USB memory stick. This application note shows you how.

PyVISA example of instrument control via Python and NI-VISA 
A short example showing instrument communications using the PyVISA 1.4 VISA wrapper with Python 2.7.9 and National Instruments VISA layer.

My spectrum analyzer displays 1st LO Unlock. What could be wrong?
1st LO unlock indicates a hardware problem. The instrument will need to be repaired.

LAN Troubleshooting using PuTTY
PuTTY is an open source network terminal emulator. It can be easily configured to help troubleshoot LAN connection issues to instrumentation.

Can I use the tracking generator on a DSA as a fixed RF source? 
Yes. You can, using zero span. See the attached note for instructions.

NationalInstruments.Common and NationalInstruments.VisaNS are not being found with .NET
Go to Solution Explorer, right click on the file of interest (NationalInstruments.Common or NationalInstruments.VisaNS) and change Specific Version to False.

Remote activation of options on a DSA spectrum analyzer 

Firmware update troubleshooting Tips 
Here are some tips if you are having issues updating the firmware on a Rigol product.

How do I find the version of UltraSpectrum software? 
Open UltraSigma, right-click on a connected DSA and select UltraSigma. Then, set the window type to advanced (upper-right-hand drop down). Next, select the ABOUT tab at the bottom of the window. See the attached note for more details.

Additional high voltage and transient protection for your spectrum analyzer 
Here is a circuit that may be helpful in protecting your spectrum analyzer from high voltages and transients.

Why do markers not always go to the exact frequency I set? 
Marker resolution is determined by the span setting. See the attached note for more information.




Application Note


Mixing RF Signals
This note uses the TX1000 RF Demo Kit, A DG4000 function Generator, and the DSA815 Spectrum Analyzer to describe and demonstrate the fundamental operation of a multiplexer.

Hardware for a simple Mixer
This note describes using a Simple Transconductance Amplifier as a Mixer.

DSA1000 Application Note

EMC Precompliance: Near Field Probes
Near field probing tips for EMI precompliance testing.

Using probes with a Spectrum Analyzer
This application note introduces the concept of using a passive high frequency oscilloscope probe with a spectrum analyzer.

EMC Precompliance Testing
This application note covers hints and tips for implementation of precompliance steps to help lower the cost of full compliance EMC testing. It also features a series of documents that have practical use details for EMC testing.

FM signal transmission and demodulation demo  
This application uses a DG4162 arbitrary waveform generator and audio source to create a custom FM transmission and then a DSA-1030A spectrum analyzer to receive and demodulate the signal.

EMC Precompliance: Conducted Emission Testing  
This application note covers standard practices for performing EMC conducted emissions tests using a Rigol DSA-815 spectrum analyzer.

Measuring Cable Loss with a Spectrum Analyzer
This Application Note covers how to measure cable loss using a spectrum analyzer outfitted with a tracking generator.

Why can't I get a DSA battery and is there a workaround for portable use?
We are unable to import the Li-Ion batteries at this time. We recommend using a true sine wave inverter for portable use. See attached for performance data for a DSA800 while running on battery.



TODAY'S
ITEMS

  • 버튼
  • 버튼
 

QUICK ICONS

라인

  • 공지사항
  • 문의하기
  • 카탈로그