동일한 측정 조건을 USB 디스크를 사용하여 여러대에 복사하여 동일한 측정 조건을 적용 가능
Pass/Fail function
특정 지역의 높은 범위와 낮은 범위의 한계를 지정하여 범위를 벗어 나는 경우 실패(Fail) 메시지 출력
10 개 그룹으로 측정조건 저장. 자주 사용되는 설정 조건을 저장후 호출
사 양
Measurement Function
Range
Frequency Range/Test Current
Accuracy: 1 Year ± (%of reading +%of range)
DC Voltage
200 mV - 1000 V
0.015 + 0.003
DC Current
200 uA - 10 A
0.055+0.005
AC Voltage (RMS)
200 mV - 750 V
20 Hz - 100 kHz
0.20 + 0.05
AC Current (RMS)
20 mA - 10 A
20 Hz - 10 kHz
0.30+0.10
Resistance(2-wire and 4-wire)
200 Ω - 100 MΩ
0.020 + 0.003
Capacitance
2 nF - 10000 uF
1 + 0.5
Diode
2.4V
1 mA
0.05 + 0.01
Continuity
2 kΩ
1 mA
0.05 + 0.01
Frequency and Period
200 mV - 750 V
20 Hz - 1 MHz
0.01+0.003
표준부속품
▶A Power Cord that fits the standard of destination country
▶Two Test Leads (black and red)
▶Two Alligator Clips (black and red)
▶A Backup Fuse
▶A Quick Guide
Options
▶Ultraview : DMM PC software
▶AlligatorClip-DMM : Alligator Clip R/B
▶LD-DM : Test Lead
▶RM-DM3000 : Rack mount kit
▶Kelvintestclip-DMM : Kelvin Test Clip
▶ RS232 Cable
동영상
F A Q
Can I measure more than one function at a time with a DM3058?
Yes. There are functions that can be measured simultaneously with a DM3058 DMM. The attached application note shows the functions that have secondary measurement capability and explains how to measure both DCV and DCI with one setup.
How can I collect data to USB using the DM3058?
See the attached document for instructions on saving data to a USB stick with the DM3058.
When I plug in my instrument via USB, I get a Windows Page Fault error ( Blue Screen of Death / BSoD ).
There is a known issue with the IVI VISA Shared components version. See attached document for more details.
How do I find the serial number and firmware revision of my DM3058 or DM3068?
Follow the attached PDF instructions to determine the revision information for your DMM.
Software Compatibility
The attached PDF file describes Windows 7 Compatibility Issues.
DMM firmware upgrade procedure.
We have attached the firmware upgrade procedure for Rigol DMM's.
VISA Runtime for Apple OS X
To use a VISA compatible Rigol instrument under Apple OS X, the user must install National Instruments VISA run-time engine for OS X As of this writing the latest OS X VISA run-time engine from National Instruments is NI-VISA 5.0 NI-VISA 5.0 can be downloaded directly
DM3058 DM3068 RS-232 communications
Both DMM's require a Null Modem Cable connection. Each line should terminate in a carriage return followed by a line feed ("/r/n").
Help File Error: Navigation to web page cancelled.
Some instrument manuals are compiled HTML files with extensions ending in .CHM. On occasion, they have shown "Navigation to web page cancelled". Here are some steps to help solve that error.
Bits vs. dBs
Here are instructions on converting bits of resolution to dBs.
My Instrument IVI Driver does not appear in the LabVIEW tools palette.
You may need to manually find and convert the IVI driver. See attachment for more details.
The instrument not recognized over the USB bus
In some cases, an instrument may not be recognized over the USB bus. Here are some troubleshooting hints to help.
Are your products UL or CSA listed?
At this time, many of our products are C TUV USA listed. Per the TUV website,http://www.certipedia.com/companies/37679/certificates?locale=enThe C TUV US mark is recognized as the equivalent and direct replacement to the UL and CSA marks by city, county and state/provincial
Rigol Scopes VISA Driver Installation / Rigol's UltraScope software not detect Rigol scope attached to PC via USB OR User receives "Run Time Error '48': File not found VISA32.DLL" error message when UltraScope is launched.
The user either has not installed the latest available National Instruments VISA Runtime engine or the version of National Instrument’s VISA Runtime Engine included on the CD that the user installed is outdated. In both cases, the recommended solution is to visit National
VB.NET basic instrument communication example
Here is a short example on using National Instrument VISA and VB.NET to communicate with an instrument.
PyVISA example of instrument control via Python and NI-VISA
A short example showing instrument communications using the PyVISA 1.4 VISA wrapper with Python 2.7.9 and National Instruments VISA layer.
How do I convert Anysensor (*.xsda) DMM Data to CSV?
The attached software and instructions can be used to convert Anysensor (*xsda) data to CSV. Software has been tested on Win XP, Win 7 32 and 64 bit OS'.
NationalInstruments.Common and NationalInstruments.VisaNS are not being found with .NET
Go to Solution Explorer, right click on the file of interest (NationalInstruments.Common or NationalInstruments.VisaNS) and change Specific Version to False.
Firmware update troubleshooting Tips
Here are some tips if you are having issues updating the firmware on a Rigol product.
한국어
"19세 미만의 미성년자"는 출입을 금합니다!
데이터 송출 관련 문의
