전체상품목록 바로가기

본문 바로가기


공급사 바로가기

DS1000E Series

(해외배송 가능상품)
기본 정보
상품명 DS1000E Series
상품간략설명

DS1000D/E Datasheet

DS1000D/E Programming Guide

DS1000D/E Specifications
판매가 문의
상품요약정보 Digital Osciloscope
제조사 RIGOL
수량 수량증가수량감소
옵션바로선택

개인결제창을 통한 결제 시 네이버 마일리지 적립 및 사용이 가능합니다.

상품 옵션
옵션 선택

(최소주문수량 1개 이상 / 최대주문수량 0개 이하)

사이즈 가이드
상품 목록
상품명 상품수 가격
DS1000E Series 수량증가 수량감소 문의 (  )
총 상품금액(수량) : 0 (0개)

이벤트

DS1052E(50MHz 2ch),DS1102E(100MHz 2ch),

DS1052D(50MHz 2ch Logic 16ch),

DS1102D(100MHz 2ch Logic 16ch)



특    징


 아날로그 입력 2채널
 디지털 로직 입력 16채널(DS1000D series만 적용)​
 메모리 크기 1Mpts
 1GS/s 샘플링 속도
 5.7인치 TFT QVGA (320x240) 64k 컬러 LCD 백라이트 디스플레이
 트리거 모드 : Edge, Pulse width, Slope​, Video, Pattern, Continuous time, Alternate
 GPIB(Option : USB to GPIB Adaptor)




화    면


1 Mpts 메모리


16채널 로직 아날라이저(DS1000D series)


다양한 트리거 지원


파형기록 기능


Pass/Fail 시험


Keyboard Lock




사    양


 Model

DS1052E/DS1102E

 DS1052D/DS1102D

 Bandwidth

50MHz / 100MHz

50MHZ/100MHz

 Analog Channels

2

 2

 Digital Logic Channels

-

 16ch

 Real-time Sample Rate

1GS/s

1GSa/s

 Equivalent Sample Rate

25GS/s

 25GSa/s

 Memory Depth

1Mpts

 1Mpts

 Standard Interface

USB Host & Device, RS-232, P/F Out

  USB Host & Device, RS-232, P/F Out

 Vertical Resolution

8 bits

8 bits

 Math

+, -, x, FFT

+,-,x.FFT

 Max Input Voltage

All input 1MΩ‖‖15pF 300V RMS CAT I

 All input 1MΩ‖‖15pF 300V RMS CAT I

 Cursor Measurements

 Manual, Track ,Auto

Auto,Track,Manual




표준부속품


 Probe×2 (1.5m), (1:1 or 10:1 adjustable) Passive Probes
 A Power Cord that fits the standard of destination country
 A Data Cable (DS1000D series)
 An Active Logic Head (DS1000D series)
 20 Logic Testing Nips (DS1000D series)
 20 Logic Testing leads (DS1000D series)
 A Quick Guide




Options


 BNC Cable
 USB Data Cable
 RS232 Cable
 USB-GPIB Adapter
 DS1000E, DS1000D soft carrying case




동영상








F A Q


DS1000E Calibration Certificate
Here is a sample of the calibration certificate for the DS1000E series.

DS1000E Packing List
Here is a sample of the DS1000E series packing slip.

DS1000D Packing list.
The attached document provides the included items with the DS1000D series.

DS1000D Calibration certificate.
Attached is an example of a calibration certificate for the DS1000D series of Oscilloscopes.

Programming Alternating Triggers
Explanation of using alternating trigger mode over the bus on the DS1000E

How do I record and view recorded waveform frames on the DS1000 series Rigol scopes?
Recording changes to signal waveforms and playing them back is possible with the Record feature of the DS1000 Rigol scopes The Record feature can be found under the Utility menu. After pressing the corresponding blue soft button with the Record option in the menu, a Mode

DS series: set menu display timeout and store for power up
To set the display timeout: Press Display Menu key > Down Arrow soft key (From page 1/3 to 2/3) > Menu display and select desired menu display time. To save settings:Press Utility Menu key > Down Arrow soft key (From page 1/3 to 2/3) > Down Arrow (From page 2/3 to /3) soft

DS1000E and D family don't timestamp bitmaps saved to USB
The DS1000E and D family of scopes do not have the ability to store the date and time. Any files written to the USB will not have an updated created on date/time in file explorers like Windows Explorer.

What is the USB data transfer time for 1 million points using the DS1000E/D family of scopes
Typical data transfer speeds for 1 million points is between 5 and 6 seconds.

How do I retrieve data using USB control for the DS1000E/D series of scopes?
The DS1000E and D series of scopes can retrieve 600, 8k, 16k, 512k, or 1M data points, depending on the configuration of the scope. The attached FAQ documents the remote commands and their order.

How do I format the data returned from a DS1000E/D series scope?
This document shows how to format data returned via USB remote control. Data is returned as a unsigned byte array and must be mathematically converted to show the traditional voltage vs. time data. Please see attached.

What is the DS1000D family Logic Analyzer bandwidth or scan rate?
There is no quoted specification for the performance of the Logic Analyzer. At this time, we have experimentally seen significant degradation of digital signal capture at rates of 50MHz. We recommend keeping data rates at ~20MHz to ensure no signals are lost.

What is the longest time duration waveform that a DS1000E/D series scope can acquire?
The longest time division is 50s/division. Therefore, the scope will acquire 10 minutes of data (50s/division * 12 divisions = 600s / (60s/min) = 10 min

How do I save digital data using the DS1000D series of oscilloscopes?
This FAQ shows how to set up the Logic Analyzer-equipped (LA) scopes to collect bitmaps and CSV data.

Ultrascope data return types
This document discusses the data return options for using the Rigol Ultrascope application that is available for many Rigol Oscilloscopes.

What is the input impedance for the DS1000D Logic Analyzer?
The DS1000D Series of Digital Scopes come with a 16 channel Logic Analyzer test head. The input impedance is 100KOhm.

What is the resolution of data returned by the DS1000E/D series of scopes?
8 bits. Which is equivalent to 3 digits. See attached for details.

Why does my DS1000E seem to miss the first trigger points on slow time scales?
When the horizontal time base is set to 50ms or slower ,the scope will into the slow scan mode. In this mode, the scope acquires sufficient data for the left part to the trigger point, then wait for trigger, when trigger occurs, it continues to draw the rest part from the

How To Acquire Average waveforms from DS1000 Scopes
DS1000 Series B and CA have firmware to write averaged waveforms to a USB stick. Averaged waveforms can be ported to computer with ULTRASCOPE

How to open .WFM ( WFM Waveform files) under UltraScope?
Please see the attached PDF instruction for a more detailed steps and screen-shots: 1- Under UltraScope click the icon of “Add new memory waveform”. 2- Click the File button in the File, and choose the .wfm file you want to open 3- Now the waveform

How to use Ultrascope with Serial (RS-232) connections
This document explains how to use a Serial connection with Ultrascope to remotely control and collect data from DS1k series of scopes.

How do I find the serial number and firmware revision of my DS1000 series of oscilloscope?
Press Utility > Down arrow (Page 1/2) > Down arrow (Page 2/2) > Press Sys Info.

Can I install UltraScope for Guests and Users without Administrative Privileges on Windows 7?
By Default, Ultrascope will only be installed on the administrative user accounts. To use Ultrascope on Guest and other user accounts without administrative privileges, please follow the attached directions. Note: These instructions were developed on Win 7 and may not

DS1000ED series oscilloscope RS232 Serial Communications
The DS1000E and D series of oscilloscopes can be remotely controlled by a PC using an RS232 Serial communications link. The attached document provides the settings used to establish communications.

What are RCD files?
Files that have the RCD extension are binary files used in Rigol DS1000 Series scopes to store waveform recordings. This file can be used to view recordings on a DS1000 Series scope or using UltraScope software.

UltraScope Installer Displays Non-English Characters
This has been addressed in the latest Ultrascope software release. Please consult with an applications engineer if the above solution doesn't address fully address your case.

DS1000E/D Firmware Update Procedure
Attached is the DS1000E/D firmware upgrade instructions. Please make sure to follow the upgrade instructions carefully as well as making sure to run the Self-Calibration* process on your DS1052E / DS1102E series scope after upgrading the firmware. * Self-Calibration

How do I view LA Digital Channels using UltraScope for the DS1000D Scopes?
The DS1000D series of scopes have a logic analyzer (LA) that enables you to capture digital signals. These instructions show you how to view those signals using UltraScope software.

How to find the hardware revision of the DS1000E/D/B scope series?
To find the expanded Hardware Revision of the DS1000B series, follow these easy steps: 1. Press Utility 2. Press the Down Arrow to reach Menu 3/3 3. Press System Info 4. Press CH1 twice > CH2 twice > MATH once

The Measure button doesn't illuminate when I press it. Is this ok?
The Measure button on the DS1000E/D series of scopes only illuminate when you have an active measurement. This operation helps indicate that the scope has active measurements when the user is a distance away from the scope.

Square wave displayed as sine wave on an oscilloscope.
A scope user attempting to view a square wave on an oscilloscope might view a sine wave of the same frequency in place of a square wave. This is not a necessarily a sign of a defect with the scope or the generator, however an effect of the constituent higher frequency harmonic

Where do I find instrument drivers for LabVIEW?

How do I configure a DS1000B Series Oscilloscope to return maximum data lengths?
This note covers how to configure the DS1000B series of oscilloscope to return the maximum data length. This can be useful for storing to a USB memory stick.

Can you set up any RIGOL scopes to stop triggering after a specific averaging number?
Not at this time. The average acquisition mode for the DS1000E/D, DS1000CA, DS1000B, DS4000, and DS6000 scopes are identical in function. They collect a boxcar average of the last acquisitions on a rolling basis.

When I plug in my instrument via USB, I get a Windows Page Fault error ( Blue Screen of Death / BSoD ).
There is a known issue with the IVI VISA Shared components version. See attached document for more details.

Software Compatibility
The attached PDF file describes Windows 7 Compatibility Issues.

VISA Runtime for Apple OS X
To use a VISA compatible Rigol instrument under Apple OS X, the user must install National Instruments VISA run-time engine for OS X As of this writing the latest OS X VISA run-time engine from National Instruments is NI-VISA 5.0 NI-VISA 5.0 can be downloaded directly

What is the capacitance of the RP6150 and RP6150A passive probe?
1.6pF.

Help File Error: Navigation to web page cancelled.
Some instrument manuals are compiled HTML files with extensions ending in .CHM. On occasion, they have shown "Navigation to web page cancelled". Here are some steps to help solve that error.

RP1300H Users Guide

RP2200 Users Guide

RP1050H Users Guide

RP5600 Users Guide

RP6150 Users Guide

Standard probes for all scopes
Here is a listing of the standard probes that ship with each scope.

Why does my data not appear to have 8 bits of resolution?
The displayed data is a subset of the actual total measurement range. This is mainly due to a smaller number of vertical pixels than bits available. See attached for more details.

Benefits of deep memory
Modern oscilloscopes feature many powerful tools to help you get your job done. Here are some of the benefits of deep memory.

Bits vs. dBs
Here are instructions on converting bits of resolution to dBs.

My Instrument IVI Driver does not appear in the LabVIEW tools palette.
You may need to manually find and convert the IVI driver. See attachment for more details.

The instrument not recognized over the USB bus
In some cases, an instrument may not be recognized over the USB bus. Here are some troubleshooting hints to help.

Are your products UL or CSA listed?
At this time, many of our products are C TUV USA listed. Per the TUV website, http://www.certipedia.com/companies/37679/certificates?locale=en The C TUV US mark is recognized as the equivalent and direct replacement to the UL and CSA marks by city, county and state/provincial

Rigol Scopes VISA Driver Installation / Rigol's UltraScope software not detect Rigol scope attached to PC via USB OR User receives "Run Time Error '48': File not found VISA32.DLL" error message when UltraScope is launched.
The user either has not installed the latest available National Instruments VISA Runtime engine or the version of National Instrument’s VISA Runtime Engine included on the CD that the user installed is outdated. In both cases, the recommended solution is to visit National

RP3300A Users Guide

VB.NET basic instrument communication example
Here is a short example on using National Instrument VISA and VB.NET to communicate with an instrument.

PyVISA example of instrument control via Python and NI-VISA
A short example showing instrument communications using the PyVISA 1.4 VISA wrapper with Python 2.7.9 and National Instruments VISA layer.

Why does my DS series trigger rate slow down with failed waveforms in Pass/Fail mode?
When a waveform fails the pass/fail mask test, the trigger hold off is intentionally increased to give the observer time to see the failed waveform.

LAN Troubleshooting using PuTTY
PuTTY is an open source network terminal emulator. It can be easily configured to help troubleshoot LAN connection issues to instrumentation.

NationalInstruments.Common and NationalInstruments.VisaNS are not being found with .NET
Go to Solution Explorer, right click on the file of interest (NationalInstruments.Common or NationalInstruments.VisaNS) and change Specific Version to False.

What data set size is used to calculate the FFT on the DS series of scopes?
The FFT is calculated using the displayed data set. DS1000E/D/B/CA series scopes = 600 Data points DS1000Z Series (Displayed) = 1200 (Memory) = 16,384 DS2000 Series = 2048 points DS4000 series = 2048 points DS6000 series = 2048 points

Why do digital scopes appear noisy?
Dave Jones, of EEVBlog, explains why digital scopes appear noisier than their Analog counterparts.

Firmware update troubleshooting Tips
Here are some tips if you are having issues updating the firmware on a Rigol product.

Direct waveform transfer from a DS scope to a DG4000 generator
You can directly transfer any waveform captured on a DS series scope to a DG4000 generator using a USB cable and a few easy steps. See attached for more details.




Application Note


Utilizing deep memory with Rigol DS1000 Oscilloscope.
Some Digital scopes offer the capability of capturing waveforms in Long Memory mode. Utilizing the long memory, Rigol scopes can capture complex signals in great detail over extended time periods. This allows an observer to examine high frequency effects within the captured waveform. To enable long memory on your DS1000E series scope, follow these simple steps: 1- Press the “Acquire” button, an acquisition menu will appear on the right hand side of the screen. 3- Find the blue soft button corresponding with Long Memory 4- Switch the Memory Depth to Long Memory For more detailed information about Long Memory, please view and download the Long Memory application note available on RigolNA.com through the solutions search feature at the following link: http://www.rigolna.com/applications/

What are the number of points captured by a DS1000E/D and replayed on a DG1022?
The attached FAQ describes how waveform files (WFM file extensions) are mapped to the DG1022 arbitrary waveform mode. 

Here are some setups and instructions to help analyze 60Hz line voltages.
The attached instructions and setup files will configure your oscilloscope to easily record and view up to 1000 frames of data as well as view the spectral content. The setups are designed for 60Hz line frequency with max voltage of 300V.

Why can't I get a DSA battery and is there a workaround for portable use?
We are unable to import the Li-Ion batteries at this time. We recommend using a true sine wave inverter for portable use. See attached for performance data for a DSA800 while running on battery.

글읽기 권한이 없습니다.

 "19세 미만의 미성년자"는 출입을 금합니다!

성인인증 하기

상품 Q&A
번호 카테고리 제목 작성자 작성일 조회
3 견적    답변 비밀글 DS1102E 테스트링크 18.01.04 14:30:19 1
2 견적 비밀글 오실로스코프 견적 문의 파일첨부 김**** 17.11.02 17:26:25 1
1 견적    답변 비밀글 오실로스코프 견적 문의 테스트링크 17.11.02 17:28:39 0

상품문의하기 모두보기

첫 페이지 이전 페이지
  1. 1
  2. 2
  3. 3
  4. 4
다음 페이지 마지막 페이지


WORLD SHIPPING

PLEASE SELECT THE DESTINATION COUNTRY AND LANGUAGE :

GO
close
카카오톡
네이버톡톡
PSYS
Blog

TODAY'S
ITEMS

  • 버튼
  • 버튼
 

QUICK ICONS

라인

  • 공지사항
  • 문의하기
  • 카탈로그